2004 6.0L Power Stroke – CRANKSHAFT TIMING WHEEL – BENT/DAMAGED CRANKSHAFT TRIGGER WHEEL – Verify

TO VERIFY THE CRANKCHAFT TRIGGER WHEEL IS DAMAGED FOLLOW THE PROCEDURE BELOW.
• Disconnect battery cables.
• Drain oil out of oil pan.
• Remove both turbocharger cooler pipes.
• Remove the radiator stator shroud.
• Loosen engine mount bolts from chassis. Lift engine off of chassis until turbo is against the heat shield on the cowl.
• Remove all the oil pan bolts. Drop oil pan down to remove bolts in the pick up tube. Remove the oil pan by backing    it out towards the transmission.
• The crankshaft trigger wheel is located at the front of the crankshaft. Manually turn engine over while inspecting         every tooth on the trigger wheel.
• If there is any visual damage to the teeth (see example below) contact the Ford Technical Service Hotline for                instructions.