Table of Contents Specifications Specifications TOC Barometric Pressure at Altitude Pressure Altitude kPa PSI mm Hg in Hg m ft. 103.2 14.96 773.9 30.47 -152 -500 101.3 14.69 760.0 29.92 0 0 99.5 14.43 746.3 29.38 152 500 97.7 14.17 733.0 28.86 305 1000 96.0 13.92 719.8 28.34 458 1500 94.2 13.66 706.6 27.82 610… Read More »
Table of Contents General Information General Information TOC NOTE ON SELECTING TAP-DRILL SIZES: The tap drill sizes shown on this card give the theoretical tap drill size for approximately 60% and 75% of full thread depth. Generally, it is recommended that drill sizes be selected in the 60% range as these sizes will provide about… Read More »
Table of Contents Torque Table Torque Table TOC Size Torque Torque Thread Actual Thread O.D. In Aluminum Components In Cast Iron orSteel Components in in N•m ft-lb N•m ft-lb 1/16 0.32 5 45 in-lb 15 10 1/8 0.41 15 10 20 15 1/4 0.54 20 15 25 20 3/8 0.68 25 20 35 25 1/2… Read More »
Table of Contents General Information Capscrew Markings and Torque Values – Metric Capscrew Markings and Torque Values – U.S. Customary General Information TOC CAUTION When replacing capscrews, always use a capscrew of the same measurement and strength as the capscrew being replaced. Using the wrong capscrews can result in engine damage. Metric capscrews and nuts… Read More »
Table of Contents Conversion Chart Conversion Chart TOC N•m ft-lb N•m ft-lb N•m ft-lb 1 9 in-lb 55 41 155 114 5 44 in-lb 60 44 160 118 6 53 in-lb 65 48 165 122 7 62 in-lb 70 52 170 125 8 71 in-lb 75 55 175 129 9 80 in-lb 80 59 180… Read More »
Table of Contents Conversion Chart Conversion Chart TOC Quantity U.S. Customary Metric From U.S.CustomaryTo MetricMultiply By From MetricTo U.S.CustomaryMultiply By Unit Name Abbreviation Unit Name Abbreviation Area sq. inch in2 sq. millimeters mm2 645.16 0.001550 sq. centimeters cm2 6.452 0.155 sq. foot ft2 sq. meter m2 0.0929 10.764 FuelConsumption pounds… Read More »
Table of Contents Conversion Chart Conversion Chart TOC Fraction inch mm Fraction inch mm 1/64 0.0156 0.397 33/64 0.5156 13.097 1/32 0.0313 0.794 17/32 0.5313 13.494 3/64 0.0469 1.191 35/64 0.5469 13.891 1/16 0.0625 1.588 9/16 0.5625 14.288 5/64 0.0781 1.984 37/64 0.5781 14.684 3/32 0.0938 2.381 19/32 0.5938 15.081 7/64 0.1094 2.778 39/64 0.6094… Read More »
Table of Contents Tension Chart Tension Chart TOC SAE Belt Size Belt Tension Gauge Part No. Belt Tension New Belt Tension Range Used* Click-type Burroughs N lbf N lbf 0.380 in 3822524 620 140 270 to 490 60 to 110 0.440 in 3822524 620 140 270 to 490 60 to 110 1/2… Read More »
Table of Contents General Information Storage Handling Disposal Test Contamination/Incorrect Fluid Freezing General Information TOC WARNING It is unlawful to tamper with or remove any component of the aftertreatment system. It is also unlawful to use a Diesel Exhaust Fluid (DEF) that does not meet the specifications provided or to operate the vehicle/equipment with no… Read More »
Table of Contents Specifications Intake Restriction (maximum at advertised horsepower) Exhaust Back Pressure (maximum) Oil Pressure Coolant Pressure Coolant Temperature Fuel Temperature Fuel Restriction Specifications TOC Maintain the following limits during the engine test and run-in procedures: Due to variations in ratings of different engine models, use the specific Engine Rating Data Sheet for the… Read More »