Thoroughly clean the oil pan and engine block gasket surfaces.
Use compressed air to clean out:
โข The galley at the oil filter adaptor hole.
โข The front and rear oil galley holes.
โข The feed holes for the crankshaft main bearings.
Once the block has been completely cleaned, apply Loctite PST pipe sealant with Teflon 592 to the threads of the
front and rear oil galley plugs. Tighten the 1/4 inch NPT plugs to 20 Nยทm (177 in. Ibs.) torque. Tighten the 3/8 inch
NPT plugs to 27 Nยทm (240 in. Ibs.) torque.