5.7 Hemi – SEAL – CRANKSHAFT OIL – FRONT – INSTALLATION

1. Using Crankshaft Front Oil Seal Installer 9072 (2) and Damper Installer 8S12A (1), install crankshaft front seal.
CAUTION: To prevent severe damage to the Crankshaft or Damper, thoroughly clean the damper bore and the crankshaft nose before installing Damper.
2. Install vibration damper (Refer to 9 – ENGINE/ENGINE BLOCKIVIBRATION DAMPER – INSTALLATION).
3. Install radiator cooling fan and shroud (Refer to 7 – COOLING/ENGINE/RADIATOR FAN ~ INSTALLATION).
4. Install upper radiator hose.
5. Install accessory drive belt refer (Refer to 7 – COOLING/ACCESSORY DRIVE/DRIVE BELTS – INSTALLATION).
6. Refill cooling system (Refer to 7 – COOLING – STANDARD PROCEDURE).
7. Connect negative cable to battery.