5.7 Hemi – RETAINER – CRANK REAR OIL – SEAL – INSTALLATION

1. Thoroughly clean all gasket residue from the engine block.
2. Use extreme care and clean all gasket residue from the retainer.
3. Position the gasket onto the retainer.
4. Position the retainer onto the engine block.
5. Install the retainer mounting bolts. Tighten the bolts to 15 N·m (132 in. Ibs.) using the procedure shown.
6. Install the oil pan (Refer to 9 – ENGINE/LUBRICATION/OIL PAN – INSTALLATION).
7. Install the flex plate (Refer to 9 – ENGINE/ENGINE BLOCK/FLEX PLATE – INSTALLATION).
8. Install the transmission.
9. Check and verify engine oil level.
10. Start engine and check for leaks.