1. Disconnect negative cable from battery.
2. Remove resonator assembly and air inlet hose.
3. Disconnect electrical connectors for the following components:
โข Manifold Absolute Pressure (MAP) Sensor
โข Intake Air Temperature (lAT) Sensor
โข Throttle Position (TPS) Sensor
โข Coolant Temperature (CTS) Sensor
4. Disconnect brake booster hose and positive crankcase ventilation (PCV) hose.
5. Remove generator and set aside.
NOTE: It is not necessary to remove lines or remove freon from A/C compressor.
6. Remove air conditioning compressor and set aside ..
7. Bleed fuel system (Refer to 14 – FUEL SYSTEM/FUEL DELIVERY – STANDARD PROCEDURE).
8. Remove intake manifold retaining fasteners in a crisscross pattern starting from the outside bolts and ending at
the middle bolts.
9. Remove intake manifold and IAFM as an assembly.