6.4L 392 HEMI V-8 – SOLENOID, MULTIPLE DISPLACEMENT – REMOVAL

1. Disconnect and isolate the negative battery cable (1).

2. Remove the intake manifold. Refer to MANIFOLD, INTAKE, REMOVAL.

3. Remove foam insulator pad (1).

4. Remove the Multiple Displacement Solenoid (MDS) (2) electrical connector(s) (1).

5. Remove the MDS solenoid (2) retaining bolt(s) (3).

CAUTION: Do not try to pry the solenoid out. This could lead to breakage and contamination of the lubrication system.

6. Lightly tap on the MDS solenoid(s) with a rubber mallet. Rotate the MDS solenoid(s) from side to side to break the seal.

7. Remove the MDS solenoid(s).