CAUTION: If the engine encounters a catastrophic failure, the engine oil cooler must
be replaced or damage to the new engine and/or components could result.
1. Raise and support the vehicle.
2. Remove the belly pan retainers (1) and remove the belly pan.
3. Drain the cooling system. Refer to STANDARD PROCEDURE .
4. Remove the oil filter (1) from the oil cooler (2).
5. Remove the clamps (1) from the cooling hoses at the oil cooler and remove hoses.
6. Using a 12 mm Allen Wrench socket (2), remove the oil cooler retaining bolt (3).
NOTE: Whenever the oil cooler is serviced, the rubber O-ring seal must be replaced.
7. Remove and discard the oil cooler (2) rubber O-ring seal (1).