6.4L 392 HEMI V-8 – SENSOR, OIL TEMPERATURE – REMOVAL

1. Disconnect and isolate the negative battery cable.

2. Remove the accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL .

3. Remove the generator upper mounting bolt.

4. Raise and support the vehicle.

5. Remove the belly pan retainers (1) and remove the belly pan.

6. Remove the generator lower mounting bolts (1).

7. Lower the vehicle.

8. Position the generator aside to gain access to the oil temperature sensor.

9. Disconnect the oil temperature sensor electrical connector (1).

10. Remove the oil temperature sensor (1).