6.4L 392 HEMI V-8 – MANIFOLD, INTAKE – REMOVAL

1. Perform the fuel system pressure release procedure. Refer to FUEL DELIVERY, GAS, STANDARD PROCEDURE .

2. Disconnect the negative battery cable (1).

3. Remove the engine covers (1).

4. Disconnect the fuel supply line. Refer to FITTING, QUICK CONNECT, STANDARD PROCEDURE .

5. Remove the air cleaner housing (5). Refer to BODY, AIR CLEANER, REMOVAL.

6. Disconnect the brake booster hose and the EVAP purge hose.

7. Disconnect the electrical connectors from the following components:
– Manifold Absolute Pressure (MAP) Sensor
– Short Runner Valve (SRV)
– Fuel Injectors
– Electronic Throttle Control (ETC)

NOTE: Remove the intake manifold and throttle body as an assembly.

8. Using the sequence shown in illustration, remove the intake manifold retaining bolts.

9. Remove the intake manifold and throttle body as an assembly from the vehicle.