Preparatory Steps
Remove the cooling fan drive belt. Refer to Procedure
008-002 in Section 2.
Cover the following parts of the engine:
โข Exhaust and intake openings
โข Electrical components
โข Fuel inlet and drain connections.
Use steam to clean the engine, and dry with compressed air.
NOTE: Make sure all engine surfaces are clean and dry before painting the engine.
Protect the following components from the paint:
โข All dataplates (engine, fuel pump)
โข Exhaust manifold
โข Turbocharg er turbine housing
โข Flywheel
โข Flywheel housing transmission mounting surface
โข Electrical connections
โข All decals
โข All pulley belt surfaces
โข Any exposed fittings, threads, and electrical wire terminals.
Paint the engine.
