Install a new a-ring in the groove on the underside of the filter head cover.
Install a small a-ring in the groove on the other side of the filter head cover.
Lubricate the a-rings with clean 15W-40 engine oil.
Install a new a-ring in the groove of the center hose connector.
Lubricate the a-rings with clean 15W-40 engine oil.
Install the outer hose connector, on the oil filter adapter, to the rear of the engine and align the marks made before
removal.
Push the center connector through the adapter and install the filter head adapter to the engine.
Tighten the center connector while keeping the markings made before the removal step aligned.
Torque Value: 100 Nโขm [ 74 ft-lb]
