Due to the number of drive belt arrangements, this procedure does not cover all available cooling fan drive
belt routing.
To make sure the cooling fan drive belt is routed correctly upon installation, make a diagram of the cooling fan belt
routing prior to removing the belt as shown in the illustration.
The cooling fan belt routing typically consists of the following components, but may not include all of them:
1 Crankshaft pulley/vibration damper
2 Fan pulley
3 Water pump pulley
4 Refrigerant compressor pulley
5 Alternator pulley
6 Tensioner idler pulley.
NOTE: Some engine driven belts are installed/supplied by the vehicle’s original equipment manufacturer (OEM). See the OEM service manual for removal and installation instructions.
