NOTE: Make sure to install the electric fan clutch mounting bracket in the same orientation and location as
removed. The mounting bracket can be installed in different orientations for different fan drive arrangements.
Install the electric fan clutch support bracket, wiring harness pigtail P-clip and mounting capscrews.
Torque Value: 33 Nโขm [ 25 ft-lb ]
NOTE: The electric fan clutch mounting capscrew has an external TorxTM head.
Install the electric fan clutch, washer and mounting capscrew.
Prior to tightening the capscrew, rotate the fan clutch so that the wires coming out of the back of the fan clutch are
captured by the P-clip. Bend the P-clip over by hand to secure the wires.
NOTE: Make sure that wires are not being pulled at the fan clutch.
Tighten the fan clutch mounting capscrew.
Torque Value: 203 Nโขm [ 150 ft-lb ]
Connect the fan clutch connector on the base harness to the fan clutch.
