NOTE: Use the tension of the drive belt to hold the cooling fan in place when tightening the mounting capscrews. Do
not hold the fan blades to keep the cooling fan from rotating.
If the engine is not equipped with an engine driven cooling fan, install the fan pulley mounting capscrews and fan
pulley.
Do not tighten the mounting capscrews at this time.
Tighten the mounting capscrews after the drive belt is installed.
Torque Value:
M6 10 Nā¢m [ 89 in-lb ]
Torque Value:
M10 43 Nā¢m [ 32 ft-lb ]
Torque Value:
M12 77 Nā¢m [57 ft-lb ]
NOTE: Some applications do not have a cooling fan or the cooling fan is located elsewhere on the application.
For engines equipped with an engine driven cooling fan, the fan holds the fan pulley and spacer in place. Install the
fan pulley and spacer.
If removed, install the cooling fan. Refer to the OEM service manual for instructions.
NOTE: Use the tension of the drive belt to hold the cooling fan in place when tightening the mounting capscrews. Do
not hold the fan blades to keep the cooling fan from rotating.
Do not tighten the mounting capscrews at this time.
Tighten the mounting capscrews after the drive belt is installed.
Torque Value:
M6 10 Nā¢m [ 89 in-lb]
Torque Value:
M10 43 Nā¢m [ 32 ft-lb ]
Torque Value:
M12 77 Nā¢m [ 57 ft-lb ]
