Spool Mount:
Install the upper alternator bracket and mounting capscrews.
Tighten the upper and lower alternator bracket mounting capscrew.
NOTE: On some applications, the lower alternator bracket and water inlet are combined in the same bracket. Refer
to Procedure 008-082, where applicable.
Install the lower alternator mounting bracket over the two dowel pins.
Install the two alternator bracket mounting capscrews and tighten.
Torque Value: 54 Nโขm [ 40 ft-lb ]
Hinge Mount:
Install the upper alternator bracket and mounting capscrews.
Install the lower alternator bracket and mounting capscrew.
NOTE: Depending on the alternator configuration, it can be necessary to wait until the alternator is installed before
tightening the lower alternator bracket. This will allow adjustment of the bracket.
Tighten the upper and lower alternator bracket mounting capscrew.
Pad Mount:
Install the alternator bracket.
Install and tighten the alternator bracket mounting capscrew.
Torque Value: 45 Nโขm [ 33 ft-lb ]
