NOTE: Use the barring tool, Part Number 3824591, to hold the flywheel to prevent rotation.
Remove two cap screws 180 degrees apart.
Install two M12 x 1.25 x 90-mm guide pins.
NOTE: If a clutch is used in the equipment, the threads in the clutch pressure plate mounting cap screw holes can be
metric or standard. Be sure to use the correct cap screws.
Determine the cap screw thread design and size, and install two T-handles in the flywheel at points (1 and 2).
Remove the remaining six flywheel mounting cap screws.
Remove the flywheel from the guide pins.
