An authorized dealer can remove (purge) water from the fuel tank. However, you can purge the fuel tank by using the following procedure.
TO PURGE THE FUEL TANK:
1. Park vehicle in a level position. The fuel pick up is in the approximate center of the tank.
2. Place a large container under the filter drain hose. Open the drain 34 turns.
3. Disconnect fuel return hose at injection pump.
4. With the fuel tank cap properly installed, apply a low pressure 20.6-34.4 kPa (3-5 psi) maximum air through the fuel return hose. The fuel tank cap is designed to retain 20.6-34.4 kPa (3-5 psi) pressure, allowing water to be forced out of the tank via the filter drain hose.
5. Continue to drain until only clear fuel is observed โ the complete contents of the tank may have to be drained.
6. Close drain valve tightly. Reinstall the fuel return hose.