NOTE: Some flex plates require mounting plates and/or clamp rings. It will be necessary to install any mounting plates and/or clamp rings prior to or with the flex plate as noted during removal. Install the flex plate cap screws, flex plate, and tighten.
Inspect the teeth of the ring gear for chips or uneven wear. Check the flex plate for cracks or other damage. Replace the flex plate if any damage is found.
Remove the flex plate cap screws and flex plate. NOTE: Some flex plates require mounting plates and/or adapters. It will be necessary to remove any mounting plates and/or adapters prior to or with the flex plate. Make sure to note the location of any mounting plates and/or adapters for later installation.
For automotive and industrial applications, inspect the flex plate ring gear teeth for damage. If the flex plate ring gear is damaged make sure to inspect the following possible causes prior to replacing the flex plate. Mechanical A mechanical issue can typically be identified by seeing damage to the ring gear of the flex plate… Read More »
Install the support bracket and mounting cap screws. Torque Value: 77 N•m [ 57 ft-lb ] NOTE: Make sure to install any shims or spacers in the same location as removed. Lower the rear of the engine. Install the rear engine mount fasteners. Tighten to the original equipment manufacturer’s specifications. Remove the lifting fixture or… Read More »
Use steam or solvent to clean the rear engine support. Dry with compressed air. Inspect the support bracket for cracks or other damage. If the support bracket is damaged, it must be replaced. NOTE: Some rear engine support brackets have rubber inserts. Make sure to inspect the inserts for separation, cracking and deterioration. If any… Read More »
Use a hoist or lifting fixture to support the rear of the engine. NOTE: When removing the rear engine mount fasteners, note the location of any shims or spacers used. Remove the engine mount fasteners. Remove the rear support cap screws and bracket.
Inspect all rubber-cushioned mounts for cracks or other damage. Inspect all mounting brackets for cracks or damaged bolt holes. Replace any damaged parts as necessary.
For Front Mount, install the front mount bracket and cap screws. For Side Mount, install the side mount brackets and cap screws. Non Cummins® Engine Mounting Bolts NOTE: Make sure to install any shims or spacers in the same location as removed. Install the front engine mount fasteners and tighten. Refer to OEM specifications. If… Read More »
Use steam or solvent to clean the front engine support bracket(s). Dry with compressed air. Inspect the engine support bracket for cracks or other damage. If the engine support bracket is cracked, it must be replaced. NOTE: Some front engine support brackets have rubber inserts. Make sure to inspect the inserts for separation, cracking and… Read More »