1/2 inch Drive, 3377371, Engine Barring Gear
Locate Top Dead Center (TDC) for Cylinder Number 1 by barring crankshaft slowly while pressing on the engine
timing pin.
Service Tip: If the timing pin has been damaged and cannot be used to locate TDC, refer to Procedure 7-21.
T-25 Torx
Remove the timing pin assembly and seal.
Install a new seal and, if required, new timing pin assembly. Hold the pin (A) in the hole (B) in the camshaft gear
to align the housing.
Torque Value: 5 N®m [4 ft-lb]
