Replacement
Preparatory Steps:
โข Disconnect the cold starting aid, if used.
โข Remove the air crossover tube, if used.
โข Disconnect the charged air cooler hose, if used.
โข Remove the high pressure fuel lines.
Removal
10 mm
Remove the manifold cover, gasket, and grid heater if equipped.
Cleaning
Clean the sealing surface.
NOTE: Keep the gasket material and any other material out of the air intake.
Installation
10 mm
Install the cover and a new gasket.
Torque Value; 24 Nยฎm [18 ft-lb]
Assemble the intake piping and connect the cold starting aid if used.
Torque clamps to 8 Nยฎm [75 in-lb].