17 mm
Remove the bleed screw banjo fitting and complete the following steps.
14 mm and 17 mm
Remove the fuel line from the Bosch fuel injection pump fitting.
NOTE: To prevent loosening the fuel injection pump inlet fitting, use two wrenches when removing the fuel supply line.
Remove 14 mm, the 16 mm, fuel supply 19 mm line and assembly 24 mm from the two Lucas
CAV fuel injection pump fittings.
NOTE: Replace the seals in the fittings if the line is disassembled.
17 mm
Install the fuel supply line in the reverse order of removal.
Tighten the fuel line securely to the fuel injection pump fittings.
Operate the hand lever 10-20 strokes to fill the fuel supply line.
