1. Remove consoles and engine cover for access to turbocharger inlet pipes. For information regarding inlet pipes, refer to Section 3.
2. Loosen flange clamps that secure left inlet pipe to exhaust manifold and turbocharger. On right side, loosen flange clamp and remove nuts that attach inlet pipe to exhaust manifold. Then disconnect pipe and move aside for working clearance.
3. Remove heat shield attaching nuts/bolts and remove shield, if equipped.
4. Disconnect glow plug wires.
5. Remove manifold attaching bolts and remove manifold (Figure 2-50).
6. Remove and discard manifold gasket.
7. Clean old gasket material off cylinder head and manifold with scraper and wire brush.
