• If any abnormality of the common rail is found, replace it.
Assembly sequence
Follow the disassembly sequence in reverse.
Removal procedure
Removal: Injection pipe and fuel pipe
Installation procedure
•Installation: Injection pipe and fuel pipe
– Ensure that the pipe and mounting surfaces of the connector are flat and free from damage.
– Bring the pipe into intimate contact with mounting surfaces of the connector evenly, and temporarily tighten it without applying an excessive force.
– After temporary tightening, position the torque wrench on and then tighten them to the specified torque.
•Installation: Hose
Install the hose to the fuel return pipe B and fuel return pipe C to the illustrated dimensions.
