Removal sequence
1 Accelerator pedal (See later sections.)
2 Accelerator link (See later sections.)
Installation sequence
Follow the removal sequence in reverse.
Removal procedure
Removal: Accelerator pedal
โข Using pliers, pinch the hook of the stopper on the accelerator pedal. Separate the stopper from the pedal while turning the hook by about 15 degrees.
Installation procedure
Installation: Accelerator pedal
โข Press the accelerator pedal until the accelerator lever touches the accelerator link lever stopper.
โข Check that the clearance between the stopper and the stopper bolt contact surface of the pedal is as indicated in the illustration.
โข If the clearance is not within the indicated value range, adjust the stopper bolt and lock it with the nut.
