Rotate the differential case bearings to check bearing condition. Inspect the differential gear condition. Replace components as needed.
[1] – Rotate side gear assemblies (A) around pinion gears. Remove side gears with cupped washers (B) from differential case.
[2] – Remove bevel gear (C) from differential case splines.
[3] – Remove bearings (D) from differential case.
[4] – Insert drift pin (E) through smaller differential case hole, and drive spring pin (F) from pinion gear shaft.
[5] – Remove pinion gear shaft (G) and pinion gears (H) with cupped washers from differential case.
[6] – Clean all parts and check for wear or damage.