John Deere – 1023E, 1025R and 1026R – Remove and Install Steering Wheel

[1] – Disengage three locking tabs at underside of steering wheel and remove steering wheel cover.

[2] – Remove nut securing steering wheel.

[3] – Remove steering wheel. If necessary, use a suitable puller.

[4] –
→NOTE:
Lightly coat the steering shaft splines with NEVER-SEEZ TM or general purpose grease before installing steering wheel to allow easy removal.

Install steering wheel and retain with nut. Tighten steering wheel nut to specification.

[5] – Install center cover to steering wheel.