[1] – Park machine safely.
[2] – Raise rear of machine and remove right rear wheel assembly. Safely support rear axle.
[3] – Remove right fender cover and fender.
[4] – Remove secure pin (A) and washer securing rockshaft feedback link to housing arm.
Remove link from arm.
[5] – Remove hex lock nut (B) securing rockshaft control lever and arm from shaft. Remove arm from shaft. Reinstall nut to shaft to retain washers.
[6] – Remove seven hex bolts (C) securing feedback valve cover. Remove cover.
[7] – Remove three hex socket bolts (D) securing feedback valve to housing. Remove valve.
[8] – Remove five hex socket head bolts (E) securing housing to transmission. Remove housing.
[9] – Remove two O-rings (F).
[10] – Remove sealant from valve and rockshaft housing surfaces.