[1] – Park machine safely.
[2] – Raise hood.
[3] – Remove spring locking clip and washer from bottom support pin (A).
[4] – Hold up hood and remove pin.
[5] – Remove bolts (B).
[6] – Raise hood while pulling hood forward until hinge rods release from hinge, remove hood.
[7] – Install hood:
a. Insert hood hinge rods into hinges and rotate hood up or down until flats on hinge and hinge rods align and slide into place.
b. Install bolts (B).
c. Align holes in hood support and firewall mounted bracket, insert pin (A).
d. Install washer and spring locking clip.