[1] – Install seat switch wire harness through openings in seat base.
[2] – Align seat track mounting holes with front and rear mounting brackets.
[3] – Install two hex socket bolts (A) and nuts securing seat tracks to front mounting bracket.
Install socket head bolts far enough to allow seat to slide forward.
[4] – Slide seat fully forward.
[5] – Install two M8x20 hex socket bolts (B) securing rear seat tracks to mounting brackets.
[6] – Tighten all socket head bolts and nuts to specification.
[7] – Install center closeout panel. (See Remove and Install Center Closeout Panel in Section 90, Group 15.)