KUBOTA – L2501 – CLUTCH – Release Hub and Clutch Lever

1. Remove the release fork (1) mounting screw (2).
2. Draw out the clutch lever (3) to remove the release fork (1).
3. Remove the hub return spring (6).
4. Remove the thrust ball bearing (4) and release hub (5) as a unit.
(When reassembling)
• Make sure the direction of the release fork (1) and thrust ball bearing (4) is correct.
• Apply grease to contact face of release fork (1) and release hub (5).
• Apply grease to clutch lever (3).
• Be sure to set the hub return spring (6).