KUBOTA – L2501 – TRANSMISSION – PREPARATION – ROPS and Fender

1. Place the disassembling stand under the mid case and the transmission case.
2. Remove the upper frame (1) and the lower frame (2).
3. Remove the rear wheels (5) and place the disassembling stands under the rear axle cases.
4. Remove the fender support assembly (6) and the fenders (7).
(When reassembling)
• After tighten the ROPS mounting bolt (3) and nut, install the cotter pin as shown in the figure.
• Tighten the ROPS upper frame mounting bolts and nuts so that the ROPS upper frame (1) does not fall down when     the ROPS upper frame (1) positioned at horizontal.