KUBOTA – L2501 – TRANSMISSION – PREPARATION – Outer Components

1. Remove the grip (1).
2. Remove the position control lever grip and position control lever guide (2).
3. Remove the floor sheet cover (3).
4. Remove the neutral holder cover (4) and the center cover (5).
5. Disconnect the brake pedal spring.
6. Remove the HST control pedal (6) and step (R.H.) (7).
7. Disconnect the differential lock spring, rod and step (L.H.) (8).
(When reassembling)
• Be sure to set the washers and rubber plates of the steps mounting screw at an original positions as shown in figure.