KUBOTA – L2501 – TRANSMISSION – PREPARATION – Electrical Wiring, Range Shift Rod, Brake Rod (L.H.) and Step

1. Disconnect the ground cable (1).
2. Remove the clamp (2) and wiring (3).
3. Remove the HST pedal (5) and the steps (4), (6).
4. Disconnect the range shift rod (7) and the brake rod (L.H.) (8).
(When reassembling)
• Be sure to set the washers and rubber plates of the steps (4) (6) mounting screw at an original position as shown in     figure.