KUBOTA – L2501 – TRANSMISSION – DISASSEMBLING AND ASSEMBLING – Mid Case

1. Tap out the spring pin (1).
2. Remove the guide plate (2).
3. Remove the lock nut (3) and lock bolt (4).
4. Remove the pinion bearing cover (6) and shims (5).
5. Separate the mid case (7) from the transmission case.
(When reassembling)
• Make sure of the number of shims in the pinion bearing cover.
• Replace the lock nut (3) with a new one, and stake the lock nut firmly after installing the parts on the shaft.
• Apply liquid gasket (Three Bond 1206C or equivalent) to joint face of mid case and transmission case.