WARNING
To avoid personal injury or death:
• Be sure to stop the engine before changing the oil filter cartridge.
• Allow engine to cool down sufficiently, oil can be hot and can burn.
1. Remove the drain plugs (1) at the bottom of the transmission case and drain the oil completely into the oil pan.
2. After draining reinstall the drain plugs.
(When reassembling)
• Fill up new oil to the upper line of the gauge (2) from the oil inlet port after removing the oil inlet plug (3).
• After running the engine for a few minutes, stop it and check the fluid level again, if low, add fluid prescribed level “A”.
IMPORTANT
• Use only multi-grade transmission fluid. Use of other fluids may damage the transmission or hydraulic system.
• Refer to “LUBRICANTS, FUEL AND COOLANT”. (See page G-9.)
• Never work the tractor immediately after changing the transmission fluid. Keeping the engine at medium speed
for a few minutes to prevent damage to the transmission.
• Do not mix different brands oil together.
