1. Remove ball bearing (2) and spiral bevel gear (1) as a unit with puller.
2. Remove the spring pin (4).
3. Pull out the pinion shaft (3) and remove the differential pinions (11) and differential side gears (9).
NOTE
โข Arrange the parts to see their original positions.
(When reassembling)
โข Apply molybdenum disulfide (Three Bond 1901 or equivalent) to the following position.
โ Differential side gears (9) (contact face with differential case (7))
โ Shims (8) (contact face with differential case (7))
โ Differential pinions (11) (contact face with thrust collar (10))
โข Install the pinion shaft (3) so that the hole on it aligns with the hole on differential case (7) and install spring pinย ย ย ย (4) noting its direction.
