1. Install the spiral bevel pinion shaft assembly only to the front axle case.
2. Measure the turning torque of spiral bevel pinion shaft.
3. If the turning torque is not within the factory specifications, adjust with the lock nut.
If the turning torque is not able to adjust by lock nut (2), change the thickness of collar (1) and adjust with lockย ย ย ย ย ย nut (2) again.
(Reference)
โข Standard size of collar (1) :
10.0 mm (0.349 in.) of thickness
NOTE
โข After turning torque adjustment, be sure to stake the lock nut.
