1. Remove the drain plugs (1) at the bottom of the transmission case and drain the oil completely into the oil pan.
2. After draining reinstall the drain plugs.
(When reassembling)
• Fill up new oil to the upper line of the gauge (2) from the oil inlet port after removing the oil inlet plug (3).
• After running the engine for a few minutes, stop it and check the fluid level again, if low, add fluid prescribed level “A”.
•IMPORTANT
• Use only multi-grade transmission fluid. Use of other fluids may damage the transmission or hydraulic system.
• Refer to “LUBRICANTS, FUEL AND COOLANT”. (See page G-9.)
• Never work the tractor immediately after changing the transmission fluid. Keeping the engine at medium speed
for a few minutes to prevent damage to the transmission.
• Do not mix different brands oil together.
