KUBOTA – L2501 – HYDRAULIC SYSTEM – DISASSEMBLING AND ASSEMBLING – Lowering Speed Adjusting Valve

1. Remove the lowering speed adjusting valve from hydraulic cylinder block.
2. Tap out the spring pin (8), and remove the grip (5).
3. Remove the internal cir-clip (4), and remove the hydraulic adjusting shaft (2).
4. Remove the internal cir-clip (6) and draw out the adjusting collar (7).
(When reassembling)
• Install the hydraulic adjusting shaft (2) and valve body (1), noting O-ring (9).