Rear Gear Train
Install the idler pulley onto the idler shaft.
For idler pulley installations in which the idler pulley shaft is not part of the idler pulley support bracket, the pulley is symmetric, so the shaft can be assembled to either side of the pulley.
NOTE: For idler pulley installations in which the idler pulley shaft is not part of the idler pulley support bracket,
the flanged side of the idler pulley shaft must sit flush against the idler pulley support bracket.
For idler pulley installations in which the idler pulley shaft is not part of the idler pulley support bracket, align the
idler pulley assembly with the mounting location on the idler pulley support bracket.
Install the idler pulley mounting capscrew and tighten.
Torque Value:
Idler Pulley Mounting Capscrews18 N โขm[ 159 in-lb ]
If the idler pulley mounting capscrew was covered by a dust shield, install a new dust shield.
The preferred method of installation is to use a press and socket that match the outside diameter of the dust shield.
If a press is not available, use a socket that matches the outside diameter of the dust shield and drive the dust
shield into the idler pulley with a hammer.
