Category Archives: International DT466

The Charge Air Cooler (CAC) Test Kit is used to pressurize the charge air cooler and piping to check for leaks.  

The Vacuum Pump and Gauge is used to test the operation of the fuel pump.

The Inline Shut-off Valve is used to make a test line assembly that connects to the ICP system test adapter to check for aerated oil specifically at the EOT sensor port. The shut-off valve can also be used to make a test line assembly to check for aerated fuel.

The ICP Test Kit is used to check ICP system diagnostics. The ICP adapter is used with an ICP sensor and the VC Gasket Breakout Harness to check the integrity of the high-pressure pump and IPR. The fitting is adapted to an air line to pressurize the UVC components and check for leaks.  

The Injection Control Pressure (ICP) System Test Adapter was first used to pressurize the ICP system for the International® VT 365 diesel engine to test ICP system integrity with the influence of the Injection Pressure Regulator (IPR) valve. This adapter is used to take an oil sample or measure oil pressure at the Engine Oil… Read More »

The fuel test fitting is used to measure fuel inlet restriction or fuel pressure. When measuring fuel inlet restriction, the fitting is installed at the diagnostic port (inlet-side) of the fuel filter housing. When measuring fuel pressure, the fitting can be installed on the fuel rail instead of the Shrader valve. The Fuel/Oil Pressure Test… Read More »

The Fuel/Oil Pressure Test Coupler is used with the fuel pressure test fitting for an easy connection to measure fuel pressure.

The Fuel Pressure Test Kit includes a quick disconnect check valve and fittings that can be used to make a test line to check fuel pressure at the high-pressure fuel rail.  

The Slack Tube Manometer is a U-shaped tube with a scale mounted between the legs of the tube. When the portability of the gauge bar tool is not required, this manometer is used to measure low vacuum for intake restriction or low pressure for crankcase. Filling Fill the manometer with water before checking pressure. Use… Read More »

The Fuel Pressure Gauge is used to check for aerated fuel at the fuel rail.