14 mm, Flat Blade Screwdriver
Locate Top Dead Center (TDC) for Cylinder Number 1.
Check/adjust the valves as indicated in the illustration (I = Intake, E = Exhaust).
Tighten the locknut and measure the valve lash again.
Torque Value: 24 N»m [18 ft-lb]
Mark the vibration damper and rotate the crankshaft 360 degrees.
Caution: To prevent engine or pin damage, be sure timing is disengaged.
14 mm, Flat Blade Screwdriver
Adjust the valves as indicated in the illustration.
Tighten the locknut and measure the valve lash again.
Torque Value: 24 N«m [18 ft-lb]
