Check/adjust the valves as indicated in the illustration (I = Intake, E = Exhaust).
Tighten the locknut and measure the valve lash again.
Torque Value: 24 N«m [18 ft-lb]
Mark the pulley and rotate the crankshaft 360 degrees.
Caution: To prevent engine or pin damage, be sure timing pin is disengaged.
Adjust the valves as indicated in the illustration.
Tighten the lock nut and measure the valve lash again.
Torque Value: 24 N»m [18 ft-lb]
15 mm
Install the valve covers and tighten capscrews.
Torque Value: 24 N»m [18 ft-lb]
