Preparatory Step:
โข Drain the coolant.
90-95 mm
Remove the lubricating oil filter.
Clean around the lubricating oil cooler cover.
16 mm, 19 mm
Disconnect the turbocharger supply line.
10 mm
Remove the lubricating oil cooler cover, gaskets and cooler element.
Clean the sealing surfaces.
Pressure test the element to check for leaks. If leaks are detected, replace the element.
10 mm
Assemble the lubricating oil cooler gaskets, element and cover.
Torque Value: 24 N*m [18 ft-lb]
NOTE: Be sure to remove the shipping plugs from the element.
16 mm, 19 mm
Connect the turbocharger lubricating oil supply line.
Fill the filter with clean lubricating oil and apply a light coat of oil to the sealing gasket.
Install the lubricating oil filter.
Fill the coolant system and operate the engine to check for leaks.
Stop the engine and check the coolant and lubricating oil level.
