17 mm
Drain the lubricating oil.
NOTE: Use a container that can hold at least 20 litres [15 U.S. qts.] of lubricating oil.
10 mm
Remove the lubricating oil pan.
10 mm
Remove the lubricating oil suction tube.
Inspect the suction tube for cracks.
Clean the gasket surfaces.
10 mm
Install the lubricating oil suction tube and new gasket.
Torque Value: 24 N*m [18 ft-lb]
Use Three Bond 1207-Cยฎ to fill the joints between the lubricating oil pan rail, gear housing, and rear seal housing.
10 mm
Install the lubricating oil pan and gasket.
Torque Value: 24 Nยปm [18 ft-lb]
17 mm
Install the lubricating oil pan drain plug.
Torque Value: 80 Nยฎm [60 ft-lb]
Fill the engine with lubricating oil. Operate the engine and check for leaks.
Stop the engine and check the lubricating oil level with the dipstick.
