Lubricate the lubricating oil pump with clean engine oil.
Install the lubricating oil pump.
13 mm
Tighten in the sequence shown.
Torque Value: 24 N*m [18 ft-lb]
NOTE: The back plate on the pump seats against the bottom of the bore in the cylinder block. When the lubricating oil
pump is correctly installed, the flange on the lubricating oil pump will not touch the cylinder block.
NOTE: Be sure the gear backlash is correct if installing a new lubricating oil pump.
Measure gear backlash.
NOTE: If the adjoining gear moves when you measure the backlash, the reading will be incorrect.
