Preparatory Steps:
โข Clean debris.
19 mm
NOTE: If individual fuel lines are to be replaced, remove the support clamp from the set of fuel lines containing the line to be replaced.
Disconnect the fuel line(s) from the injectors.
10 mm
Remove the fuel line clamp capscrews from the intake cover.
19 mm
Disconnect the fuel line(s) from the fuel injection pump.
If removed, reinstall the support clamp in the original position and make sure the lines do not contact each
other or another com ponent.
Loosen the vibration isolator capscrews so the fuel lines can be easily moved.
NOTE: To prevent breakage to the fuel lines, they must be connected to the injector and fuel injection pump in a โfree
stateโ without forcing the connecting nuts. Since the fuel lines are properly sized for specific application, bending
should not be necessary.
Install the fuel lines in the reverse order of removal.
NOTE: The inside holes of the intake manifold are drilled through and require liquid teflon sealant.
