10 mm
Remove the capscrews from the hold-down clamps and complete the following steps.
10 mm
Remove the banjo fitting screws and washers.
17 mm
Disconnect the fuel drain line fittings.
Assemble the fuel drain line and fuel drain manifold in the reverse order of disassembly.
NOTE: Use new seals for the fittings.
The installation torque for the banjo fitting screw is 9 Nยซm [7 ft-lb].
NOTE: Use new sealing washers for the fuel drain manifold.
The installation torque for the clamp capscrews is 24 N*m [18 ft-lb].
