Install two 1/2 – 13 X 1 1/2 puller capscrews which have
a minimum of 1 1/4-inch threaded area at points (1) and
(2).
Remove capscrews (3) and (4), and install two 5/8 – 18 X
6-inch guide studs.
Determine the capscrew thread size, and install two โโT-
handlesโโ in the flywheel at points (4) and (5).
Remove the remaining four flywheel mounting capscrews.
Warning: Because this part weighs more than 23 kg [50
lbs], two people or a hoist will be required to lift the
flywheel to avoid personal injury.
Tighten capscrews (1) and (2) in alternating sequence to
loosen the flywheel.